IN THE SHOP!

This page will be utilized to show what we are currently working on, to give our readers ideas of the new designs we are working on for the future.

We will update this page on a regular basis in an attempt to stay current with the work in progress in the shop. Might not always be surfboards but could be anything interesting.

"The Starship" Quad Fish Kneeboard

Dimensions

Length: 5' 9" Nose Width: 19" Overall Width: 24" Wide Point: 1 1/2" Back Tail Width: 20" Thickness: 2 3/4" - 3" Tail Shape: squash tail fish Fin Layout: quad with a 10" center box Bottom Design: single concave - deep VCTR bottom Design Date: July 2019

Comments

There is no deck concave on this design to maximize the floatation and provide the most versatility for knee placement. There is a fin well at the tail, where the deck has been hollowed out to accommodate the riders fins when kneeling.

The deck is inlaid with a layer of carbon in addition to our regular 2 x 6-oz layup. Bottom is a single 6-oz layer.

The bottom design features our VCTR bottom, which has a single concave through the nose area, moving into a double concave and then into a bonzer-like double channel through the tail. On either side of the channel there are flat panels with a roughly 3ยบ bevel onto which the fins are placed. These panels then provide nice flat surfaces when the board is on the rail allowing the fins and the flat to work together for increased speed and turning performance. The bottom also features a chine at the rail in order to help with transitioning and also to provide extra bite in the rails.

The fins are setup as a quad setup, with a regular 10" center box. Boxes are GEARBOX for the best strength and performance.


Missing image
©2013 - 2019 MAIR DESIGNS LLC. All Rights Reserved.

Site built using Foundry for Rapidweaver®

Privacy Policy